Best Nintendo Switch 2 Accessories (2026): Controllers, Cases, and More

The Switch 2 isn’t like other consoles. If you were meant to take your Xbox Series X to the park, you’d probably need a strange-looking backpack. For the Switch 2, portability isn't just a feature; it's a key selling point. With that in mind, there are two paths you can take to outfit your console for adventure, based on how you play.

If your Switch 2 will spend most of its life in the dock or in your hands on the couch, I’d recommend an attachable grip case. Like your phone case, these clamp onto the console and Joy-Cons, providing a minor shield for bumps and bruises. They often add extra features like ergonomic grips while still allowing access to commonly used ports. On the other hand, if you’re a world traveler planning to take your Switch 2 on every flight, train ride, or road trip, opt for a classic carrying case. These hold your console and games and usually have extra room for cables or adapters. You can toss these into your bag while packing up for a trip and know your console will make it safely to your destination.

Whatever road you choose to walk, I've got a slew of accessories to improve your experience and keep your console clean, charged, and ready to play. Read our Best Switch 2 Controllers guide for more.

Updated January 2026: We've added new options for cases, charging docks, game holders, and connectivity options.

One of the recurring complaints about the original Switch is that the Joy-Cons are super slim and not very ergonomic. Especially for folks with bigger hands, the Pro Controller is a much better option. For handheld play, extra attachments became increasingly common further into the console’s life, adding extra bulk and more traditional, rounded grips to the Joy-Cons.

Because the new Joy-Cons are still flat on the back, many manufacturers have gone ahead and built these grips into cases right from the jump. This is one of the main draws of adding a case to your Switch 2, especially if you plan to play primarily in handheld mode. The downside is that the console will no longer fit into some cases, although we have picks for both below.

Yes, Your Switch 2 Needs a Screen Protector

Unfortunately, you need a screen protector for your Switch 2, thanks to the built-in plastic cover that will likely scratch and scuff over time. In general, I'd recommend buying one from the same brand that you get your case or grip from. You'll avoid any issues with sizing or compatibility, and almost every accessory maker on this list offers some kind of discount if you buy them as a bundle, not to mention saving on shipping.

There are other factors to consider. Some dedicated manufacturers offer different finishes for specific situations, and applicators are also becoming more common, which helps make sure everything is smooth and lined up correctly.

One of the major upgrades Nintendo made for the Switch 2 is a new kickstand. It runs the width of the console, with two firm hinges, and it's a massive improvement for playing on the go. Unfortunately, case makers have struggled to figure out how to incorporate it, which is understandable. There's no clear attachment point, so most cases include double-sided tape and a kickstand-shaped chunk of plastic you can just stick to the back.

I’d worry more about lining it up wrong or potentially breaking the kickstand if you tried to remove it than I would about a slight gap on the back of the case. Because I had to swap through a bunch of cases, I generally skipped this step, and in almost all cases, the extra piece is only cosmetic. Instead, I briefly tested the included strips of adhesive on a single spot on the back of my Switch, just to make sure they didn’t leave any obvious residue.

I've had a chance to check out a variety of grip cases and bumpers of various sizes and weights, but the Dbrand Killswitch 2 is what I use on my console. The unique texture on the outside is almost sticky without being uncomfortable, and it makes me feel confident carrying my $450 console around the house. It’s the same finish and material found on the Dbrand Grip, one of our favorite Pixel 10 cases, and it works here just as well. The Killswitch 2 builds chunky, comfortable Joy-Con grips right into the case, which makes the console instantly more comfortable to play in handheld mode.

Every Killswitch 2 includes a dock adapter, which cleverly slots into the official dock so you don’t have to take the case off. Because it won’t fit into most carry cases with the extra bulk, you can also buy a sturdy plastic lid that clamps around the front and protects the screen, while also holding up to 10 cartridges. I don’t think I’d pack it in a suitcase like that, but I’ll toss it in my backpack with other junk and go for a bike ride without worrying about it.

Some users reported issues with the Joy-Cons staying locked to the console with the grips attached. Dbrand redesigned the grips to prevent any issues and is offering them free to anyone who bought the original Killswitch 2, along with extra pads for the dock adapter that should make it easier to separate with one hand.

For a more traditional carrying case, I'd go with Belkin’s Charging Case. As the name implies, there’s a battery pack that slides into its own compartment in the bottom of the case, with a short right-angle cable that fits perfectly into the console’s lower charging port. I really appreciate the thoughtful design here, with little touches like a hidden AirTag compartment and a kickstand groove so you can play in tabletop mode while still charging.

The inside feels soft and cozy, and the outside is rigid enough that I'd be happy throwing this into a carry-on. There's room for games, extra cables, and there was even enough extra space inside that some of the smaller Joy-Con grips, like the Spigen Nano Pop, can stay on. The bonus compartment has room for my headphones, the SteelSeries Arctis GameBuds. This is the kit I’d pack up for flying or a road trip, where I might be away from outlets and navigating busy areas, but usually parked in one spot while I actually play.

The Switch 2 has 256 GB of internal storage, but games are getting bigger in a hurry, so you’ll likely need to add more space before you know it. The microSD card from your old Switch won’t work, however, so you’ll need to pick up a new microSD Express card. I wrote up a guide explaining the new standard and its benefits, and in a quick game transfer, this SanDisk was slightly faster. I recommend at least 256 GB, since you only have one slot.

At a glance, you'd be forgiven for thinking the Switch 2 Pro Controller is a simple retool of the original Switch's comparable number, merely adding in the C button to activate the new console's GameChat features and recoloring the shoulder buttons. However, Nintendo has subtly redesigned key elements, resulting in a very different experience. Chiefly, the hand grips are now slightly slimmer and are positioned at a tighter angle, resulting in a pad that looks practically the same as its predecessor but feels smaller to hold.

It really leans into the “Pro” part, though, adding two customizable buttons—GL and GR—to the underside of the grips. The function can be tailored on a per-game basis and is easily swapped around by holding down the Home button mid-play. A 3.5-mm port is incorporated, too, allowing headsets to be connected. It also has a near-seamless design, preventing gamer gunk from accumulating in crevices. If you're spending a lot of time gaming on your Switch 2 in docked mode, this official controller remains one of the best ways to play. Read our Best Switch 2 Controllers guide for more picks. —Matt Kamen

It's generally worth buying a screen protector from the manufacturer where you get your case. Most of the brands mentioned above will offer a discount or bundle if you buy them together, and you'll avoid any fit or compatibility issues. I didn't find any of the options compelling enough over the others to warrant going out of my way to find them.

That said, the Spigen Glas.tR EZ Fit had an easy application process and went on perfectly straight, and after that, I forgot it was there. I appreciate the inclusion of a proper cleaning wipe, which I find does a better job than just a basic microfiber at preventing dust or particles from getting stuck underneath. You get a two-pack for cheap, so you can share with a friend or keep one on ice in case the unthinkable happens.

If you can't decide between a grip case and a carrying case, consider the Jsaux Carrying Case. It's a little bit larger than the Belkin, but in exchange, you can fit your console inside with most larger grip cases attached. It comes with little pads you can insert if you just want to store the console snugly with no grips, and a shoulder strap for easy carrying. It has a very rugged feeling topside, with a velvety interior, and the game holder has a soft felt underside that sits against the console's screen while closed, and flips up as a kickstand for play.

While most of the carrying cases at the top of our list sport some storage for your games, this dedicated option from Jsaux holds up to 40 games or microSD cards. The outside lid is sturdy plastic, so you can toss it in your bag without worry, and the magnetic closure limits any breakable parts while keeping the lid closed. It's not particularly fancy, but it gets the job done well at a nice price, and firmly grips your games in the rubbery foam.

While you could certainly opt for any number of bulky over-ear gaming headsets, I think the Switch 2’s portable nature pairs perfectly with the SteelSeries Arctis GameBuds (9/10, WIRED Recommends). The slim adapter plugs right into the console’s USB-C port for low-latency 2.4-GHz audio, and the SteelSeries app has equalizer profiles for Switch games that help improve the already impressive sound quality.

I also found they fit right into the extra compartment on the Belkin Charging Case, which helps turn that compact carrying case into a fully equipped portable gaming station. These are way easier to carry around than any over-ear option, are super comfortable, and are a natural companion for making sure you hear that blue shell coming, even on a full flight.

For an attachable grip case that’s a bit slimmer than our primary pick, Spigen’s Nano Pop case provides light protection from bumps and scratches. It also includes Joy-Con grips, which add just a little bit of extra bulk to the controllers, making them more comfortable for handheld play without limiting your other case options as much. They come in a variety of fun colors too, which adds a little pop to the Switch 2's more serious face.

It technically fits into the official dock, but it's a tight squeeze, and you'll need to carefully situate everything to get it seated, although it fits in the Belkin Charging Case just fine. I think these are a great option for someone who rarely plays docked but still wants some extra ergonomic benefits and a shell to protect from minor scratches. My only complaint here is that quite a few pieces of double-sided tape were involved in the installation.

While the Switch Pro Controller 2 is undoubtedly the best choice for a dedicated gamepad, PowerA's wireless controller is another great option at a slightly lower price. Despite the discount, it sports some advanced features, namely magnetic Hall effect thumbsticks that should be more durable than the joysticks found in other controllers. It has programmable buttons on the rear, too, in case you want to bind some shortcuts to these easier-to-reach spots on the back.

This larger carrying case from Jsaux is perfect for hauling around your entire Switch 2 kit. In addition to the console and 10 game cartridges, I'm able to fit my dock and associated cables and two Pro Controllers and still have room to spare for extra Joy-Cons or other accessories. The exterior has a shell that’s hard enough for me to feel comfortable tossing it into the back seat of my car or using the shoulder strap to take it on a bike ride.

It's probably a little large for most people, but if you're expected to bring Mario Kart World to the weekly hang, this case will let you pack everything you need and then some.

If you just bought a new Switch 2, you should probably pick up the improved Switch 2 Pro Controller, but the original is still a great option if you can find it on sale. The sticks and buttons feel great, it's super comfortable to hold, and it has almost all of the features of the new controller. You can even find it for quite cheap, given how long it's been on the market, making it a perfect choice for your second through fourth players.

The Switch 2 can only charge one set of Joy-Cons at a time, so if you have a second set, consider a dock to keep them all fully powered. The Jsaux dock has space for four Joy-Cons, individual lights to track their charging status, and a compact footprint. The controllers charge quickly and easily pop onto and off the case with the existing magnetic connection. There's also a portable version if you want something you can shuffle into your bag and take with you.

If you’re juggling multiple Joy-Con 2s but want to show off a bit, Snakebyte’s multi-charger is a strong alternative to the Jsaux. The Quad Charge S2 has a more elegant design than Jsaux's basic cuboid, while the central inverted-Y LED rig has 13 light cycles, a mix of solid single colors, slow pulses, or a blended rainbow look.

Functionally, it charges quickly and features individual charging indicators for each controller, while the slight angle at which the Joy-Cons sit when docked to charge makes them easier to slot in and out of the unit. The base is also weighted for a more stable feel. The one big oversight is that there’s no charging adapter, an odd choice for any charger, but it does come with a roughly 3-foot-long USB-C to USB-A cable that can be used with any compatible plug. —Matt Kamen

One of the biggest innovations Nintendo brought to the Switch 2 was the ability to use the Joy-Con 2 controllers as mice. There’s already a host of games making use of the feature, from modern releases like Metroid Prime 4: Beyond, Bravely Default, and Drag X Drive, to old-school outings like Mario & Wario and Mario Paint—which used the original SNES mouse—available through Nintendo Switch Online’s vintage libraries. There’s just one small issue: the Joy-Cons are pretty uncomfortable to use as a mouse. These fix that problem, though, providing a pair of more conventionally mouse-shaped shells to slot each controller into.

The result is a significantly more comfortable experience, with raised arches supporting the full span of your hand and offering natural resting spots for your fingers, both of which help massively reduce wrist strain. A bit more heft to them would have been welcome, as they’re a bit too lightweight, and the wrist straps meant to add security just feel in the way. They also pack in LED lighting with 12 modes, cycling between solid, blended, or oscillating colors—a snazzy touch, but it does require a single AA for each mouse. Sadly, it's only available through Amazon UK at the time of writing, but it may be worth an import for other regions. —Matt Kamen

At the moment, if you need an extra dock, you'll have to go with the official Nintendo option. I've tried a few USB-C hubs, and while some charged the system, none of them were able to output video. The good news is that the official dock from Nintendo is noticeably wider and less tippable than the Switch 1 version, and it’s easier to get plugged in.

The bad news is that the only place to buy a replacement or additional dock is directly from Nintendo, and you'll likely need to log in to your qualified Nintendo account. It also costs $125, which feels pretty steep for a charger, HDMI cable, and chunk of plastic, not to mention the fact that it's frequently out of stock.

iMP Tech DLEX+LED Multi-Function Charger Stand for £35: Perfect for streamers or desk-bound players, this will keep your gaming space tidy and your controllers fully juiced. It has charging slots for four Joy-Con 2s and four original Joy-Cons on the main base unit, all with charge indicators, while two pop-out USB-C cables at the rear allow you to connect more conventional joypads, like the Switch 2 Pro Controller. Power is provided through the charging adapter you already plug into your console’s dock, which is in turn locked in place on the DLX2 with a dual USB-A block that feeds the power through. It’s compatible with the Switch 2, original Switch, and the Switch OLED, and the two USB slots you lose on the dock itself are replaced with pass-through ports on the left of the base for other accessories. Organizationally, the stand gives you somewhere to hang your headset, while a spring-loaded tray on the right holds and hides up to nine Game Carts. It can be a little fiddly to set up, and overall charging can slow down if you try to connect the maximum 10 devices, but once done, it’s a great storage solution, elevated by subtle but striking RGB lighting. However, like iMP’s mouse adapters, stock seems limited to Amazon UK at the time of writing. —Matt Kamen

Spigen Rugged Armor for $18: This molded grip case has heavy bumpers and thick Joy-Con grips, but it was tough to remove, which you'll have to do a lot, because it won't fit in the dock with the case on, and you can't separate the Joy-Cons either. This would be a good case if you're buying the console for a younger kid whom you don't trust to treat it gently.

Belkin TemperedGlass Screen Protector With Blue Light Filter for $30: While I liked the look of this screen protector, and the blue light filter is handy for late-night gaming sessions, the lackluster applicator frame isn't quite as nice as the other options. It's also a bit expensive, at $30 for just one.

Dbrand Prism 2.0 for $35: I liked the Prism 2.0 screen protectors and their application process as much as the Spigen above. But they’re slightly more expensive and only available directly from Dbrand, so if you buy them on their own, you'll have to pay shipping. If you're buying anything else, like a case or a skin, you'll get a discount and likely qualify for free shipping, making these well worth it.

Jsaux Joy-Con Charging Grip for $15: If you often play with the Joy-Cons detached, this charging grip from Jsaux lets you continue playing while charging the controllers in the process via the USB-C slot at the top of the handle. It also puts them at a more ergonomic angle, but keeping them attached makes some motion controls unusable, and I would've liked to see an internal battery.

Save With a Peacock Promo Code: 3 Months Free

AT&T Top Deals: Wireless, Internet, Bundles and More!

10% Off Exclusive Squarespace Promo Code 2026

Bundle and Save on Your T-mobile Business Plan

10% Off Home Depot Promo Code With Sign-up